Press ‘exit’ to get back to the home screen or just wait the 9 seconds or more and it will go there for you automaticallyĭone! You’ve got your offset duplex thing all set.If the voice audio is on you will hear ‘confirm’ which means victory This means “I am now saving the settings I edited in step 4. Toggle with up/down arrows to the setting you want.In this case, a menu will appear because you can toggle between +, – and blank In this post, we’ll show you how to program a BTECH UV-5X3 with CHIRP. You can use CHIRP to program 11 different BTECH models, including our amateur radios and our GMRS and MURS radios. You’ll see a little arrow appear if you have options to see by using the arrow keys. The answer is, Get CHIRP CHIRP is a free, open-source application for programming many different radios from dozens of manufacturers. Also tone is very important when programming AB and BCFS channels, as they use up to 9 different tones for their repeaters. You simply set your tone, select Split, and input your TX Frequency. This means “I am now editing this part of the menu”. The trick to the Baofeng and Chirp is to use the Split function under Duplex rather than the +/. Duplex This is your repeater shift it will be either + or depending on. Programming cables can be bought from eBay for about £5 - £10 depending on which radio it is for. This will bring you to the section of menu where you can edit whether duplex is + or – (default is 600 by the way). Check the CHIRP website for a complete list of compatible radios and makes sure that your radio can be programmed using CHIRP. Important note: if you wait more than 9 seconds between any step below it will automatically go back to home screen and you have to start again, so work those fingers, baby! How to Set the Plus/Minus (+/-) Offset Duplex for Repeater Use in Baofeng UV-5R This is part of a series of posts that hopefully will save people a bunch of time.

Chirp programming duplex